Trucs
Documentation
   • Autour de LDAP
   • Awstats
   • Backup HP COLORADO 5G
   • Compatibilit� Linux
   • Configuration NFS
   • Configuration ZSH
   • Configuration de FreeBSD
   • Connexion ADSL PPPOE
   • IPFILTER
   • Installation PXE
   • Installation d'un DNS
   • Installation d'un Squirrelmail
   • Installation de Apache SSL
   • Installation de FreeBSD
   • Installation de GRUB
   • Installation de MailScanner
   • Installation de PostgreSQL
   • Jail sous FreeBSD
   • Mise a jour de votre FreeBSD
   • Serveur CVS
   • Serveur DHCPd
   • Serveur IRCd
   • Serveur NTPd
   • Serveur ProFTPd
   • Serveur at home
   • Utilisation simple de CVS
   • X11: interface graphique
Download
Informations
About
Le

Et aussi ...
rockanjou.org




Mise en oeuvre d'un Backup sur HP COLORADO 5G

sommaire



Introduction

Aspects mat�riels

Aspects logiciels

Installation Flexbackup

Utilisation simple

Utilisation avan��e

Conclusions


introduction


Ce condens� synth�tise les articles que j'ai lus sur les BACKUP et expose de fa�on concr�te la fa�on d'installer et de configurer un syst�me de backup bas� sur FreeBSD 4.10 en association avec un Hp colorado ide de 5 go (bande type travan).

Les donn�es expos�es dans cet article sont tir�es de mon exp�rience personnelle avec les mat�riels et softwares cit�s.
Elles r�sultent de nombreux tests, tatonnements, empirismes...

aspects mat�riels


La mat�riel utilis� est :
  • mini pc avec carte mini itx epia 800 avec 256 Mo ram et un disque dur ide de 40 Go
  • hp colorado ide 5 go compress� (bande type travan)


Le Colorado est connect� en slave secondaire.

Il est reconnu par le bios sans probl�me.

aspects logiciels


La version de FreeBSd utilis�e est 4.10.

Au niveau du kernel, il faut activer, si ce n'est pas d�j� fait, l'option :
device atapist # ATAPI tape drives

et recompiler le noyau.

Dmesg fournit le message suivant :

ast0: TAPE at ata1-slave PIO4

installation flexbackup


Un logiciel open source, simple et souple, disponible dans les ports est FLEXBACKUP.

cd /usr/ports/sysutils/flexbackup
make && make install && make clean


L'installation se passe normalement sans soucis. Il reste � configurer le fichier /etc/flexbackup.conf.

Mon fichier personnel est joint en annexe.

Les lignes � renseigner ou � modifier sont les suivantes :

# Device to backup to. -->> non-rewinding version, please! <<--
$device = '/dev/nast0';

# Block size (in kilobytes!) to use for archive programs and dd. Default is
$blksize = '32';

# Block size (in bytes!) to use for the tape device, with "mt setblk" or
$mt_blksize = "0";

# Padding. True to pad blocks to blocksize
$pad_blocks = 'true';

Ces param�tres sont ceux � configurer au minimum. Compte tenu de la richesse de Flexbackup, il y a �videmment d'autres options utilisables d�taill�es dans le man.

utilisation simple


Les commandes minimum utiles et les cas les plus simples sont examin�s ci-apr�s. Il s'agit de sauvegarde compl�te.
A titre d'exemple, les temps n�cessaires � la sauvegarde et � l'extraction d'un r�pertoire de 3.7 go sont de l'ordre de 1h15.

1) pr�paration de la bande :

a) Effacement


mt -f /dev/nast0 rewind
mt -f /dev/nast0 erase

b) Cr�ation d'un index sur la bande :


flexbackup -newtape
mt -f /dev/nast0 rewind

2) v�rification de la bonne syntaxe du fichier /etc/flexbackup.conf


flexbackup -test-tape-drive entraine un message (extrait) :
--------------------------------------------------------------------------------------------------------------------------------------
flexbackup version 1.2.1
(http://flexbackup.sourceforge.net)
/etc/flexbackup.conf syntax OK
|------------------------------------------------------------
| Checking 'buffer' on this machine... Ok
| Checking /bin/sh on this machine... unknown (probably Bourne Shell)
|------------------------------------------------------------
......................................................
Comparing...
SUCCESS! Tape drive parameters seem to work just fine
---------------------------------------------------------------------------------------------------------------------------------------------

Malgr�s certains messages d'erreurs, tout fonctionne correctement.

3) Sauvegarde d'un r�pertoire :


Apr�s 1)a) et 1)b), faire :

flexbackup -dir /home/repertoire_a_enregister

les donn�es ont comme num�ro d'index = 1 pour cet exemple

4) Lister les fichiers contenus dans une archive :


mt -f /dev/nast0 rewind
mt -f /dev/nast0 fsf 1
flexbackup -list


fsf 1 correspond au num�ro d'index des donn�es

5) Restauration des donn�es du r�pertoire :


se placer dans le r�pertoire o� l'on veut restaurer les donn�es /home/repertoire_pour_restauration

mt -f /dev/nast0 rewind
mt -f /dev/nast0 fsf 1
flexbackup -extract



6) Comparer les fichiers contenus dans une archive avec ceux du r�pertoire courant :


mt -f /dev/nast0 rewind
mt -f /dev/nast0 fsf 1
flexbackup -compare


7) v�rification des donn�es entre l'original et la restauration :


diff /home/repertoire_a_enregister /home/repertoire_pour_restauration

utilisation avan��e

1) Sauvegardes successives :


Il suffit d'enchainer les instructions :

flexbackup -dir /home/repertoire_a_enregister01
flexbackup -dir /home/repertoire_a_enregister02
flexbackup -dir /home/repertoire_a_enregister03
flexbackup -dir /home/repertoire_a_enregister04
flexbackup -dir /home/repertoire_a_enregister05

Le num�ro d'index est automatiquement incr�ment� de 1 � chaque sauvegarde (1 � 5 ici)

2) Restauration successives :


Il suffit de rembobiner la bande
mt -f /dev/nast0 rewind

et de positionner la bande (fsf 1 � 5 ici) au niveau des diff�rentes sauvegardes avec

mt -f /dev/nast0 fsf 1

puis d'extraire les donn�es dans le r�pertoire o� l'on ex�cute la commande

flexbackup -extract

3) Restauration dans le r�pertoire courant d'un ou de plusieurs fichiers list�s dans un fichier texte liste_fichiers_a_extraire :


mt -f /dev/nast0 rewind
mt -f /dev/nast0 fsf 1
flexbackup -extract -
flist /chemin/liste_fichiers_a_extraire

conclusions

Les exemples trait�s ici ont �t� volontairement simplifi�s afin de bien comprendre le m�canisme de sauvegarde.
L'exploration des commandes de flexbackup et la configuration du fichier /etc/flexbackup.conf vous apporteront les solutions � vos probl�matiques de sauvegarde personnelles.
Le co�t d'un tel syst�me acquis d'occasion sur Ebay est d�risoire (40 euros sur ebay) et permettra de rendre bien des services.
Il est � noter que l'on peut aussi sauvegarder sur un deuxi�me disque dur, voire m�me sur plusieurs tapes et �galement sur un r�pertoire distant d'une autre machine.

ANNEXES :


flexbackup.conf
# -*-Mode: perl-*-
# ----------------------------------------------------------------------
# Flexbackup configuration file
# check "flexbackup -help" for usage information
# ----------------------------------------------------------------------
# General configuration section
# Archive type? afio, dump, tar, cpio, star, pax, zip, lha, ar, shar
# 'copy' or 'rsync' are extra options if running in archive-to-disk mode.
# 'filelist' dumps a list of files in your cwd - for debugging setup/exclusion
$type = 'afio';
# Configure backup "sets".
# Not needed if you use "-dir
" to backup one tree at a time.
# Each set is a simple space-separated list of filesystems
# Remote filesystems should denoted as 'host:dir'
# You can use anything (other than 'all') as set names
#

# Example:
# $set{'set1'} = "/home /usr";
# $set{'set2'} = "/dir3 machine2:/dir4 machine3:/dir5";
#

# "-set all" will back up all defined sets. If you are doing a full backup
# using tapes, each "set" will go onto a different tape and you will be
# prompted for tape change in between.
#

$set{'backup'} = "/home";


# Subtree pruning
# A space-separated list of directories to prune from each backup.
# Key is a filesystem or host:dir spec as outlined above
# regular expressions allowed (not shell-type wildcards!) $prune{'/'} = "tmp proc";


# Compression
$compress = 'gzip'; # one of false/gzip/bzip2/lzop/zip/compress/hardware
$compr_level = '4'; # compression level (1-9) (for gzip/bzip2/lzop/zip)


# Buffering program - to help streaming
$buffer = 'buffer'; # one of false/buffer/mbuffer
$buffer_megs = '10'; # buffer memory size (in megabytes)
$buffer_fill_pct = '75'; # start writing when buffer this percent full
$buffer_pause_usec = '100'; # pause after write (tape devices only)

# Device to backup to. -->> non-rewinding version, please! <<--
#
# Examples:
# Linux SCSI: /dev/nst0 Linux IDE: /dev/nht0
# Linux ftape: /dev/nqft0 FreeBSD SCSI: /dev/nrsa0 (4.x compat device node)
# FreeBSD SCSI: /dev/nsa0 (5.x)
#
# If a directory, will archive to files in that directory rather than a device
# If "host:/dev/tapedevice", will use remote tape drive via rsh/ssh
#
#$device = '/dev/tape';
$device = '/dev/nast0'; Hp colorado 5 go
#$device = '/usr/repertoire_o�_stocker_la_sauvegarde'; si on veut sauvegarder sur disque dur

# Block size (in kilobytes!) to use for archive programs and dd. Default is
# 10 for most things. Some tape drives need 32 or 64. Set to '0' to
# disable all blocking
$blksize = '32';

# Block size (in bytes!) to use for the tape device, with "mt setblk" or
# equivalent. If set to 0, will use "variable" block size for the tape
# device (which is recommended). Comment out or set to "$blksize * 1024" to
# have it be the same as the archiver block size above. $mt_blksize = "0";

# Padding. True to pad blocks to blocksize
# (devices only, not used when archiving to files)
$pad_blocks = 'true';

# Other global flags
$remoteshell = 'ssh'; # command for remote shell (rsh/ssh/ssh2)
$remoteuser = ''; # if non-null, secondary username for remote shells
$label = 'true'; # somehow store identifying label in archive?
$verbose = 'true'; # echo each file?
$sparse = 'true'; # handle sparse files?
$indexes = 'true'; # false to turn off all table-of-contents support

# If backing up to files, use static filenames - no date stamp
# (same level backup of same directory will overwrite old backups)
$staticfiles = 'false';

# True to try and preserve file access times during backup, if the selected
# archive program can do so. Note that if this is true, -cnewer checks (file
# permission/status changes only, not content) are turned off when deciding
# which files to archive on the local system. $atime_preserve = 'false';

# Span across filesytems? ("dump" will ignore this option)
# Set to "false" (don't) , "local" (all but nfs/smbfs), or "all" (everything)
$traverse_fs = 'false';

# Exclude files that match these *regular expressions* (not shell wildcards)
# from the backups (no affect on 'dump' archives). You can list more than one,
# just keep incrementing the index in the brackets for each. Also, strip off
# leading directories (the filesystem specs above or the "-dir" flag).
# Matches paths, not filenames, so put .* on the front/back as needed.
# Comment these out to exclude nothing.
$exclude_expr[0] = '.*/[Cc]ache/.*';
$exclude_expr[1] = '.*~$';

# If true (default), and using a tape device, level zero "set" backups
# assume you want to erase and use a new tape for each set. If false, level
# zero "set" backups append to tapes. To force an erase for any backup,
# use "-erase" on the commandline.
$erase_tape_set_level_zero = 'true';

# Set this to "true" to make erase operations just call "mt rewind" - not
# "mt rewind' followed by "mt erase". (For some tape drives, erase takes
# hours rather than seconds or is otherwise undesirable)
$erase_rewind_only = 'false';
#$erase_rewind_only = 'true';

# ----------------------------------------------------------------------
# Log/stamp files, path for temporary files

$logdir = '/var/log/flexbackup'; # directory for log files
$comp_log = 'gzip'; # compress log? false/gzip/bzip2/lzop/compress/zip
$staticlogs = 'false'; # static log filenames w/ no date stamp
$prefix = ''; # log files will start with this prefix
$tmpdir = '/tmp'; # used for temporary refdate files, etc
$stampdir = '/var/lib/flexbackup'; # directory for backup timestamps
$index = '/var/lib/flexbackup/index'; # DB filename for tape indexes
$keyfile = '00-index-key'; # filename for keyfile if archiving to dir
$sprefix = ''; # stamp files will start with this prefix

# ----------------------------------------------------------------------
# Parameters for 'afio' only

# File extensions that should not be compressed (seperate with spaces)
$afio_nocompress_types = 'mp3 MP3 Z z gz gif zip ZIP lha jpeg jpg JPG taz tgz deb rpm bz2 lzo';

# True to show block numbers
$afio_echo_block = 'false';

# Files less than this size (kilobytes) won't be compressed $afio_compress_threshold = '3';

# Maximum amount of memory (megabytes) to use for temporary storage of
# compression results. If a compressed file is bigger than this, compression
# will have to run twice on the file (see manpage).
$afio_compress_cache_size = '2';

# ----------------------------------------------------------------------
# Parameters for 'tar' only

# True to show record numbers
$tar_echo_record_num = 'false';

# ----------------------------------------------------------------------
# Parameters for 'cpio' only

# Format of cpio archive
$cpio_format = 'newc';

# ----------------------------------------------------------------------
# Parameters for 'dump' only

# Estimated tape size (in kilobytes). This number doesn't really do much
# but help 'dump' get size estimates if set to zero uses 'dump -a'
$dump_length = '0';

# True to use /etc/dumpdates (could mess things up if you dump subdirectories
# of mount points). False to use flexbackup's timestamps. $dump_use_dumpdates = 'false';

# ----------------------------------------------------------------------
# Parameters for 'star' only

# Use fifo (buffering)? (you probably want to set $buffer=false above if so)
$star_fifo = 'true';

# Handle ACLs?
$star_acl = 'true';

# Format of star archive
$star_format = 'exustar';

# True to show block numbers
$star_echo_block_num = 'false';

# ----------------------------------------------------------------------
# Parameters for 'pax' only

# Format of pax archive
$pax_format = 'ustar';

# ----------------------------------------------------------------------
# Parameters for 'zip' only

# File extensions that should not be compressed (seperate with spaces)
$zip_nocompress_types = 'mp3 MP3 Z z gz gif zip ZIP lha jpeg jpg JPG taz tgz deb rpm bz2 lzo';

# ----------------------------------------------------------------------
# Parameters for 'package delta' backups

# Archive a list of all installed packages in the top level of each backup?

# Can be 'false', 'true' (save it for any backup), or # 'rootonly' (saves list only if the filesystem is '/') $pkgdelta_archive_list = 'rootonly';

# Archive files not "owned" by packages? $pkgdelta_archive_unowned = 'true';

# Archive any package-owned files which have been modified? $pkgdelta_archive_changed = 'true';

# ----------------------------------------------------------------------
# Paths to commands. Default will look for them in $PATH. Use this if
# you want to set commands explicitly. You can use full paths or just
# change command names.
#
# Example: If GNU tar is called "gtar" on your system:
# $path{'tar'} = 'gtar';
#
# Or can be used to "sudo" certain commands. Examples:
# $path{'find'} = 'sudo find';
# $path{'dump'} = 'sudo dump';
# $path{'afio'} = 'sudo -u nonrootuser afio';
#

# ----------------------------------------------------------------------
# mt operation overrides. Set if flexbackup doesn't know the right mt
# command(s) for your OS/device, or you want to override things.
#
# Example: use "mt status" instead of "mt tell"
# $mt{'tell'} = 'status';


######################################################################
#
# $Id: flexbackup.conf,v 1.74 2003/09/21 22:59:58 edwinh Exp $
# $Name: v1_2_1 $
#
# Leave '1;' on the the next line - for perl 'require'
1;

Marc HOQUET le 2004/09/22